Get A Quote
decking cleaning

Whether you are preparing to sell your house or you simply want to have your deck look like new again, there are steps to take when you are deck cleaning. The first step is to pressure clean the deck. This will remove dirt, grime, and mold. Once the surface has been cleaned, you can apply oxygen bleach, a bleaching agent, or vinegar. The surface will smell new and clean.


Using a pre-rinse decking cleaning solution is a great way to remove dirt and grime on your deck without having to use chemicals. You should always read the instructions on the bottle and ensure that the solution is safe for your deck.

There are several types of deck cleaners, including those that are sprayed onto the deck, those that are mixed with water, and those that are applied with a mop. A pressure washer can also be used to clean your deck. However, you should use caution when using a power washer. This can cause damage to your timber deck or even splinter it.

For tougher stains, you may need to use a more powerful cleaner. You can buy a deck cleaner that is specially designed to remove heavy stains. You can also make your cleaning solution. However, you should wear protective eyewear and long sleeves to protect yourself from the cleaner.

For timber decks, you should use ammonia-free liquid dish soap. This is because ammonia-based cleaners can create chlorine gas which can cause irritation to the eyes and noses.

Oxygen bleach is also safe to use on timber decks. Apply a paste to stubborn stains using a stiff bristle toothbrush. Depending on the stain, you may need to wait a few hours before removing the stain.

There are also deck cleaners that contain natural ingredients that brighten your deck without causing damage to plants around your property. You can also use a garden hose to rinse off the cleaning solution.

The best time to clean your deck is early in the morning. Debris can accumulate on your deck during the day and cause dirt to settle.

Wash your clothes with pressure

A deck that looks great can increase the value of your home. It is important to take care of it. Using a pressure washer can help you get rid of dirt, mildew, and algae. It can also remove debris stuck between deck boards.

You should clean your deck’s surface first before you begin pressure washing. This will prevent dirt from getting stuck under the stain. You might also want to use a cleaner, specific to your deck’s materials.

For the best results, use a scrub brush instead of a power washer. A smaller brush is better if you have limited space. You can also use an extension wand.

The pressure cleaner nozzle should be kept at a safe distance from the wood. Using too much pressure can ruin your wood. You should never point a pressure washer at other people.

The nozzle should also be kept moving. Using a steady sweeping motion will help you cover each area on your deck evenly. You should start at the side closest to your house and work your way out. This will also help you conceal the strokes you make.

A pressure washer should be used on a clean surface. You should also be sure to use an extension wand to reach high areas. If you don’t have access to a pressure washer, you can use a hose and nozzle. You should also avoid using a zigzag motion.

To determine how far the pressure cleaner nozzle is from the wood, it should be tested. It should also be cleaned and maintained occasionally to keep it operating at peak performance. A different pressure range may be an option for your washer. Some homeowners prefer a washer that has a pressure range between 1,300 and 2,400 PSI.

Soda crystals

Decking cleaning can be done with Soda Crystals. It is a simple way to get rid moss and algae. Soda crystals are inexpensive and effective. They are also non-toxic.

They are great for removing stains and grime and are a great option for those who don’t want to use harsh chemicals. They are also an easy way to clean clogged drains. You can buy soda crystals at your local supermarket or online from Amazon.

They are also good for cleaning uPVC window frames. Large bags can also contain soda crystals. These bags are sold under the name ELCO and can be found at Chinese wholesalers.

Soda crystals can also be used to clean your BBQ grills. They can also be used for cleaning wheels and bins. You can even use it to clear clogged outside drains. You can also use it to remove stains from wood.

You can also clean your chopping boards with soda crystals. This is because they can cut through the muck without eroding. You should rinse it off with clean water to remove any residue. To remove any buildup, you can also use a scrub brush or stiff brush.

Soda crystals can also help to clean your oven racks. You can also use it to remove fat from roasting trays. This can be done by soaking them in a solution of soda crystals and water for a few minutes. The crystals will absorb the fat and can be thrown out.

You can also clean your jewelry with soda crystals. The solution can be used to soak your jewelry for approximately 10 minutes, then rinse it with clean water.

Oxygen bleach

Unlike chlorine bleach, oxygen bleach is non-toxic and won’t damage your plants. The ions it releases are strong cleaners that are perfect for removing organic and mildew stains. It can also restore the wood’s color.

Oxygen bleach can be found in the laundry detergent aisle of your local grocery store. It can be used on most surfaces, but you should test it on a small area of your deck before covering it. It should also be followed by a thorough hose rinse.

Oxygen bleach is available in powder and spray forms. You can use it with a mop, a sprayer, or a hand-pump. It is not recommended for use on softwoods or painted surfaces. However, it can be used on all types of surfaces.

Oxygen bleach isn’t toxic or harmful to humans or plants, but you should still wear water-proof gloves and work in a well-ventilated area. Boosting agents can cause skin irritation in high concentrations.

Borax can be added to the solution to remove mildew. Borax is a naturally occurring mineral compound. Borax can be used to remove mold, moss, and other stains. Borax will not harm your plants or local landscaping.

You can also make a homemade deck cleaner using liquid dish soap and oxygen bleach. You can apply the soap using a brush, but it is best to let the soap sit for at least 10 to 15 minutes before you scrub.

This homemade deck cleaner will clean your deck of dirt and grime, but it won’t harm your plants or softwood. Make sure to follow the directions carefully, because this solution can be too harsh for your skin.


Using vinegar to clean your deck is a safe way to get rid of stains. It can also be used to kill mildew or mold. However, you should never use vinegar alone. Instead, mix it with baking soda and a natural liquid dish soap.

You can also use commercial deck cleaners, in addition to vinegar. Many brands claim to be safe for your family and the environment. These products may not be able to combat stubborn mold or mildew.

Another option is to make your own cleaning solution. White vinegar and baking soda can be used. Mix the ingredients together in a gallon of water and then scrub the deck surface. It will take about 10 minutes. Afterward, rinse the deck.

You can also use oxygen bleach, which is safer than chlorine bleach. It is perfect for timber decks. However, you should wear personal protective equipment when using these products.

A mixture of vinegar, baking soda and soap can be used to clean decks. This mixture can remove iron stains from your deck. It can also be used to brighten your wood.

To apply the solution to the deck, you can use a sprayer or a hose. You can also use a long-handled brush to scrub the deck. Do not use metal brushes, as these can ruin the surface. You can use a soft-bristled brush to help the solution absorb better.

After the mixture has dried, rinse the deck with clean water. The vinegar solution should be easy to remove with a standard garden hose. You can also use a power washer to get rid of dirt and grime. However, these products can also damage the finish on your deck.

Leave a Reply

Your email address will not be published.

You may use these <abbr title="HyperText Markup Language">HTML</abbr> tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>